The sophisticated and elegant look of roman blinds make them the ideal option to dress up any types of windows. These are also known as roman shades, can be utilized as a standalone window treatment fitted outside the window or inside a window recess. In addition, it can also be integrated in combination with curtain drapes for a layered and classy look. They are ideally made from light to medium weight fabrics which are usually lined.
Making roman blinds is very simple and does not require special skills. In fact, procedures and detailed instructions are readily available online. You can also conveniently access how to make roman blinds videos for a clearer and easier step-by-step instruction. But you do not have to waste your time searching online because this article will present you a quick and easy way to make roman blinds.
Of course, you need to start by gathering and preparing all the required items. This include the fabric, lining, small plastic rings (approximately 0.5″ in diameter), strips of wooden or plastic dwelling (3 cm less than the blinds width), wooden or brass acorn, nylon cord, stick and sew Velcro, wall cleat, 4 screw eyelet and a wooden batten (approximately 1″ x 1″ x width of the finished blinds).
Once all the needed materials have been gathered, begin by measuring the fabric quantities. To accurately calculate the length of the required fabric, you have to measure from the top of the track down to the chosen length of the blinds. It is recommended to add some hem allowances to give way for the style of the blinds. In addition, allow extra lengths for pattern matching when necessary. Keep in mind that the length of the required lining must be the same with the fabric requirements but minus the extra length from the pattern matching.
When you are finished with the fabric measurements, you can now cut the fabric into the required size but make sure to add 5 cm to the fabric’s width for seam allowances and another 5 cm to the fabric’s length. You have to ascertain that there is a full width in the center of the fabric along with equal width parts on each side. Next, carefully cutout the lining with exactly the same measurements as with the top fabric and make sure to omit the extra allowance used for pattern matching.
After which, lay both the lining and the top fabric to easily match the raw edges. Then, smooth out the wrinkles or creases so you can conveniently pin them together. Once the lining and fabric has been pinned, you can now sew the side and the bottom of the roman shade. Do not forget to include a half seam allowance so it will perfectly fit on your window recess. After following these quick and easy steps, you have now come up with cheap roman blinds that will give more life to your window!
